Loading ...
Loading ...
Loading ...
For steady wiping at low speed, move the stalk up to
the
(1)
position. For high-speed wiping, move the stalk
up further, to
(2).
To
stop the wipers, move the
stalk
to
OFF.
You
can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain
or snow.
Move the stalk to
DELAY?
then rotate the inner band and
choose the delay you want. Rotate the inner band
up
for
shorter delay times between wiper cycles. Rotate the band
down for a longer delay time between wiper cycles.
Remember that damaged wiper blades may prevent
you
from seeing well enough to drive safely. To avoid
damage, be sure to clear ice and snow from the wiper
blades before using them.
If
they’re frozen to the
windshield, carefully loosen or thaw them. If your
blades do become damaged, get new blades or
blade inserts.
Heavy snow or ice can overload your wiper motor.
A
circuit breaker will stop the motor until
it
cools. Clear
away snow
or
ice to prevent an overload.
Windshield Washer
To
wash your windshield, pull the stalk toward you until
the washers begin.
2-38
Loading ...
Loading ...
Loading ...