Loading ...
Loading ...
Loading ...
FADE:
Press the knob lightly
so
it extends. Then pull
the knob all the way out. Turn it to move the sound to
the front or rear speakers. The middle position balances
the sound between the speakers.
Push these knobs back into their stored positions when
you’re not using them.
Playing
a Cassette Tape
Your tape player is built to work best with tapes that are
30
to
45
minutes long on each side. Tapes longer than
that are
so
thin they may not work well
in
this player.
The longer side with the tape visible should face to the
right. If the ignition is on, but the radio is off, the tape
can be inserted and will begin playing.
If
you hear
nothing but a garbled sound, the tape may not be in
squarely. Press EJECT to remove the tape and start over.
While
the
tape
is
playing, use the VOL, FADE, BAL,
TREB,
BASS
and
TONE
controls just
as
you do for the
radio. The display will show TP with a box around it
and an arrow to show which side of the tape is playing.
Your tape bias is set automatically. When a metal or
chrome tape is inserted, HI-BIAS appears
on
the
display. If you want to insert a tape when the ignition is
off, first press EJECT or RCL.
If
E
and a number appear on the radio display and the
tape won’t play because
of
an error, it could be that:
E10: The tape
is
tight and the player can’t turn the
tape hubs. Remove the tape. Hold the tape with the
open end down and try to turn the right hub
counterclockwise with a pencil. Turn the tape over
and repeat. If the hubs do not
turn
easily, your tape
may be damaged and should not be used in the
player. Try a new tape
to
make sure your player is
working properly.
0
El1:The tape is broken. Try a new tape.
If any error occurs repeatedly or
if
an error can’t be
corrected, please contact your retailer.
If
your radio
displays an error number, write
it
down and provide it to
your retailer when reporting the problem.
REV (1): Press this button to reverse the tape rapidly.
Press
it
again to return to playing speed. The radio will
play the last-selected station while the tape reverses.
You may select stations during REV operation by
using
TUNE.
FWD
(2):
Press this button to advance quickly to
another part of the tape. Press the button again to return
to playing speed. The radio will play the last-selected
station while the tape advances.
You
may select stations
during FWD operation by using TUNE.
Loading ...
Loading ...
Loading ...