Loading ...
Loading ...
Loading ...
3.
Check both sides
of
the dipstick and read the lower
level. The fluid level must be between the
ADD
and
FULL marks. (Note: Fluid may appear at the bottom
of the dipstick even when the fluid level is several
pints low.)
4.
If
the fluid level is where it should be, push the
dipstick back in all the way and flip the handle
down.
If
the fluid level is low, add more fluid as
described in the next steps.
How
to
Add
Fluid
Here’s how to add fluid. Refer to the Maintenance
Schedule to determine what kind
of
fluid to use. See
“Recommended Fluids and Lubricants” in the Index.
1.
Remove the dipstick by flipping the handle
up
and
then pulling the dipstick out.
2.
Add fluid at the dipstick hole.
Add only enough fluid to bring the fluid level up to
the FULL mark on the dipstick.
3.
Push the dipstick back in all the way; then flip the
handle down to lock the dipstick in place.
Hydraulic
Clutch
The hydraulic clutch linkage in your vehicle is
self-adjusting. The clutch master cylinder reservoir
is
filled with hydraulic clutch fluid.
It isn’t a good idea to “top
off’
your clutch fluid. Adding
fluid won’t correct a leak.
A
fluid loss in this system could indicate
a
problem.
Have the system inspected and repaired.
Loading ...
Loading ...
Loading ...