Loading ...
Loading ...
Loading ...
3.
Check both sides
of
the dipstick, and
read the lower
level.
The
fluid
level must be in the
cross-hatched area.
4.
If
the fluid level is in the acceptable range, push the
dipstick back in
all
the way.
How
to
Add
Fluid
Refer to the Maintenance Schedule to determine what
kind of transaxle fluid to use. See “Recommended
Fluids and Lubricants” in the Index.
If
the fluid level is low, add
only
enough of the proper
fluid to bring the level into the cross-hatched area on
the dipstick.
1.
Pull out the dipstick.
2.
Using a long-neck funnel, add enough fluid at the
It doesn’t take much fluid, generally less than one pint
(0.5
L).
Don’t
oveflll.
dipstick hole to bring it to the proper level.
NOTICE:
We recommend you use only fluid labeled
DEXRON@-111, because fluid with that label is
made especially for your automatic transaxle.
Damage caused by fluid other than
DEXRON@-111 is not covered by your
I
new vehicle warranty.
3.
After adding fluid, recheck the fluid level as
described under
“How
to Check.’’
4.
When the correct fluid level is obtained, push the
dipstick back in
all
the way.
6-21
Loading ...
Loading ...
Loading ...