Loading ...
Loading ...
Loading ...
Care of Safety Belts
Keep belts clean and dry.
I
PL
CAUTION:
Do
not bleach or dye safety belts. If you do, it
may severely weaken them. In a crash, they
might not be able to provide adequate protection.
Clean safety belts only with mild soap and
lukewarm water.
Cleaning Glass Surfaces
Glass should be cleaned often. GM Glass Cleaner (GM
Part
No.
1050427)
or a liquid household glass cleaner
will remove normal tobacco smoke and dust films.
Don’t use abrasive cleaners on glass, because they may cause
scratches. Avoid placing decals on the inside rear window,
since they may have to be scraped
off
later.
If
abrasive
cleaners are used on the inside of the rear window, an electric
defogger element may be damaged. Any temporary license
should not be attached across the defogger grid.
Cleaning the Outside
of
the
Windshield and Wiper Blades
If the windshield is
not
clear after using the windshield
washer, or if the wiper blade chatters when running, wax,
sap or other material may be on the blade or windshield.
Clean the outside of the windshield with
GM
Windshield
Cleaner, Bon
A.mi@
Powder (non-scratching glass cleaning
powder), GM
Part
No.
105001
1.
The windshield is clean if beads do not
form
when you
rinse if with water.
Grime from the windshield will stick to the wiper blades
and affect their performance. Clean the blade by wiping
vigorously with a cloth soaked in full-strength windshield
washer solvent. Then rinse the blade with water.
Check the wiper blades and clean them as necessary;
replace worn blades.
Weatherstrips
Silicone grease on weatherstrips will make them last
longer, seal better, and not stick or squeak. Apply
silicone grease with a clean cloth at least every
six months. During very cold, damp weather
more frequent application may be required.
(See
“Recommended Fluids and Lubricants’’ in the Index.)
6-f’
Loading ...
Loading ...
Loading ...