Loading ...
Loading ...
Loading ...
46
1.
Press the SHUTTER button on the control
panel. or on the remote control.
The mechanical lens shutter closes and
the screen turns to black. The SHUTTER
indicator on the projector blinks in yellow
while the shutter is closed.
To open the shutter and restore the screen,
press the SHUTTER button again.
Temporarily shading the screen
1.
Press the FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen
(however, the indication will not appear when the
SILENT is selected for the OSD MESSAGE item in
the SETUP (75), and the projector will go into the
FREEZE mode, which the picture is frozen.
To exit the FREEZE mode and restore the screen to normal, press the
FREEZE button again.
Temporarily freezing the screen
►If you want a blank screen while the projector's lamp is on,
use the lens SHUTTER function. Any other action may cause the damage on the
projector.
WARNING
• The projector automatically exits from the FREEZE mode when some
control buttons are pressed.
• Images might appear degraded when this function is operated, but it is not a
malfunction.
NOTE
•
The projector will turn off automatically when the time set up by the
SHUTTER TIMER passes
(83)
.
• When turning off the power by the normal procedure, the shutter opens
automatically. If AC power supply is disconnected while opening or closing the
shutter, the moving of the shutter stops. However, the next time the projector is
turned on, the shutter opens again automatically.
NOTE
SHUTTER
button
FREEZE
button
Operating
Loading ...
Loading ...
Loading ...