Loading ...
Loading ...
Loading ...
35
This projector is equipped with memory functions for the
lens adjustments (ZOOM, FOCUS, LENS SHIFT and
LENS TYPE). Up to three sets of adjustments can be
stored.
To use the lens memory feature, press the
LOAD
or
FUNCTION
button while the LENS SHIFT dialog is dis-
played, or press ▲ button while the ZOOM or FOCUS
dialog is displayed. Then the LENS MEMORY dialog will
appear. The current lens adjustments are displayed on
the “CURRENT” line. The adjustments already stored
in the lens memory are displayed on the lines of SAVE
and LOAD-1 to 3.
Lens memory
FUNCTION
button
SHUTTER
LENS
MEMORY
button
SAVE:
To
utilize the save lens memory feature,
press the ► button while CURRENT is
selected on LENS MEMORY dialog or press
the
SAVE
button on the remote control.
To
store the current lens adjustments, select one
of the "SAVE" options numbered 1 to 3 (number of the lens memory) and press the
►or
ENTER
button, while LENS MEMORY OSD is displayed.
Remember that the current data being stored of a memory will be lost by saving
new data into the memory.
LOAD:
To recall stored adjustments, select one of the "LOAD" options numbered 1 to
3 (number of the lens memory) and press the ►or
ENTER
button, while LENS
MEMORY OSD is displayed.
Remember that the current adjusted condition will be lost by loading data. If you
want to keep the current adjustment, save it before performing a LOAD function.
CLEAR LENS MEMORY:
To clear the adjustment stored in a lens memory, select CLEAR LENS MEMORY
and press the ►or
ENTER
button, while LENS MEMORY OSD is displayed. Press
the ►button. A message dialog is displayed for conrmation. Press the ►button
again to clear all of the lens memory.
Operating
• The projector may ignore the operation by buttons while moving the lens.
・Depending on the lens type, this function may not support.
NOTE
Loading ...
Loading ...
Loading ...