Loading ...
Loading ...
Loading ...
107
Replacing the internal clock battery
Consumption of the battery makes the clock not to work correctly. When the clock is
inaccurate or stopped, replace the battery according to the following procedures.
1.
Turn the projector off, and unplug the power cord. Allow the
projector to cool sufciently.
2.
After making sure that the projector has cooled adequately,
slowly turn over the projector, so that the bottom is facing
up.
3.
Turn the battery cover fully in the direction indicated “
OPEN
”
using a coin, and pick the cover up to
remove it.
4.
Pry up the battery using a athead screwdriver to take it
out. Do not use any metal tools. While prying it up, put a nger
lightly on the battery as it may pop out of the holder.
5.
Replace the battery with a new
HITACHI MAXELL
,
Part No.
CR2032
or
CR2032H
.
Slide the battery in under the plastic claw, and push it
into the holder until it clicks.
6.
Replace the battery cover in place, then turn it in the
direction indicated “
CLOSE
” using a coin.
WARNING
►Always handle the batteries with care and use them only as
directed. Battery may explode if mistreated. Do not recharge, disassemble or
dispose of in re.
And also improper use may result in cracking or leakage, which could result in
re, injury and/or pollution of the surrounding environment.
・ Be sure to use only the batteries specied.
・ Make sure the plus and minus terminals are correctly aligned when loading a battery.
・
Keep a battery away from children and pets. If swallowed consult a physician
immediately for emergency treatment.
・ Do not short circuit or solder a battery.
・ Do not allow a battery in a re or water. Keep batteries in a dark, cool and dry place.
・
If you observe battery leakage, wipe out the leakage and then replace a battery. If the
leakage adheres to your body or clothes, rinse well with water immediately.
・ Obey the local laws on disposing a battery.
OPEN
CLOSE
OPEN
CLOSE
OPEN
CLOSE
90°
OPEN
CLOSE
90°
Battery Cover
Maintenance
Loading ...
Loading ...
Loading ...