Loading ...
Loading ...
Loading ...
110
Regarding the indicator lamps
Indicator Status Description
The projector is cooling down. A certain error
has been detected.
Wait until
POWER
indicator nishes blinking, and
then perform the proper measure using the item
descriptions below.
The lamp cover has not been properly xed.
Turn the power off, and allow the projector to cool
down at least 20 minutes. After the projector has
sufciently cooled down, conrm the attachment
state of the lamp cover. After performing any needed
maintenance, turn the power on again. If the same
indication is displayed after the remedy, contact your
dealer or service company.
The cooling fan is not operating.
Turn the power off, and allow the projector to cool
down at least 20 minutes. After the projector has
sufciently cooled down, conrm that no foreign
matter has become caught in the fan, and so on, and
then turn the power on again.
If the same indication is displayed after the remedy,
contact your dealer or service company.
The lamp does not light, and there is a
possibility that interior portion has become
heated.
Turn the power off, and allow the projector to cool
down at least 20 minutes. After the projector has
sufciently cooled down, conrm the following items,
and then turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air lter dirty?
• Use the unit within the temperature range.
NORMAL MODE: 0 to 45°C
ECO MODE: 0 to 50°C
HIGH ALTITUDE: 0 to 40°C
If the same indication is displayed after the remedy,
change the lamp referring to the section
Replacing
the lamp
.
(continued on next page)
Red
descretionary
Red
Red
Red
Red
Red
RedRedRed
RedRed
Loading ...
Loading ...
Loading ...