Loading ...
Loading ...
Loading ...
7
Slicing and Shredding
(Use Angled Feed Tube
and Pusher)
1. Properly insert
desired Cutting
Cone into Cutting
Cone Holder.
2. Place Angled Feed
Tube on unit and
turn counter-
clockwise until it
clicks to lock into
place. Feed Tube
should be facing you.
3. Trim the edges
of the fruit or
vegetable to form
a at surface the
width of the
Feed Tube. Place food item
directly into the Feed Tube.
4. Turn stand mixer to
speed setting 12.
Push down with
even force to
process; items will
drop into the bowl. When
processing is complete, turn
stand mixer speed setting to 0.
Results:
Based on the Cutting Cone used.
2.5mm Slice/Ribbon (Green):
3.0mm Crinkle Slice/Ribbon (Blue):
3.0mm Thin Shred/Spaghetti (Maroon):
9.0mm Wide Shred/Spaghetti (Black):
CLEANING,
STORAGE AND
MAINTENANCE
• Unplug the power cord
before cleaning. Do not put
power cord, plug or stand
mixer in water or other liquids.
• Clean all accessories after
each use.
• Disassemble all the
accessories attached: Feed
Tubes, Cutting Cones and
Cutting Cone Holder.
• Rinse under running water
and remove food scraps with
Cleaning Brush.
• All removable parts are top
rack dishwasher safe.
• Wipe the outside surface of
the motor unit with a damp
cloth, then dry thoroughly.
CAUTION:
• Ensure that the stand mixer is
unplugged when disassembling.
• The blades are sharp; please
handle carefully when cleaning.
NOTE: Never immerse the
stand mixer in water for cleaning.
Maintenance: Any other
servicing should be performed
by an authorized service
representative.
Tips and Hints
• Choose vegetables and fruits
that are firm and not overripe.
• Ingredients do not need to be
cut to fit the height of the
Feed Tube. Some ingredients,
however, may need to be
trimmed to fit the width of the
Feed Tube.
Loading ...
Loading ...
Loading ...