Loading ...
Loading ...
Loading ...
Checking Brake Fluid
Warning: Contact Tesla immediately if you
notice increased movement of the brake
pedal or a significant loss of brake fluid.
Driving under these conditions can result
in extended stopping distances or
complete brake failure.
The Brake indicator on the
instrument panel alerts you if the
quantity of fluid in the brake
reservoir drops below the
recommended level. If it displays
while driving, stop as soon as safety
permits by gently applying the
brakes. Do not continue driving.
Contact Tesla immediately.
Fluid Level Check
Tesla checks the brake fluid level at the
regularly scheduled maintenance intervals.
Topping Up the Brake Fluid
Do not top up your brake
fluid. Tesla service
does this when you bring Model X in for
regular servicing. The following instructions
are provided for information purposes and
future reference only:
1. Clean the
filler cap before removing to
prevent dirt from entering the reservoir.
2. Unscrew the cap and remove.
3. Top up the reservoir to the MAX mark
using brake
fluid meeting DOT3
specifications.
4. Replace the filler cap.
Warning: Only use new
fluid from a sealed
air-tight container. Never use previously
used fluid or fluid from a previously
opened container—fluid absorbs moisture
which decreases braking performance.
Warning: Brake fluid is highly toxic. Keep
containers sealed and out of the reach of
children. In the event of accidental
consumption, seek medical attention
immediately.
Caution: Brake fluid damages painted
surfaces. Immediately soak up any spills
with an absorbent cloth and wash the
area with a mixture of car shampoo and
water.
Topping Up Washer Fluid
The only reservoir into which you can add fluid
is the washer fluid reservoir located under the
front trunk. When the level is low, a message
displays on the instrument panel.
Do not use formulated washer
fluids that
contain water repellent or bug wash. These
fluids can cause streaking, smearing, and
squeaking or other noises.
Operate the washers periodically to check that
the nozzles are clear and properly directed.
To top up washer
fluid:
1. Clean the filler cap before opening to
prevent dirt from entering the reservoir.
2. Open the
filler cap.
3. Fill the reservoir until the fluid level is
visible just below the filler neck.
4. Replace the
filler cap.
Note: Some national or local regulations
restrict the use of Volatile Organic
Compounds (VOCs). VOCs are commonly
used as antifreeze in washer
fluid. Use a
washer fluid with limited VOC content only if it
provides adequate freeze resistance for all
climates in which you drive Model X.
Caution: Under no circumstances do you
need to inspect or top up other fluid
reservoirs. Two additional fluid reservoirs
are located next to the washer fluid, but
underneath the maintenance panel. In the
unlikely event that you see a message on
the instrument panel that one of these
fluid levels is low, stop Model X as soon as
safe to do so, and contact Tesla.
Caution: Do not spill washer fluid on body
panels. Doing so can cause damage. Wipe
up spills immediately and wash the
aected area with water.
Warning: In temperatures below 4° C, use
a washer fluid with antifreeze. In cold
Fluid Reservoirs
Maintenance 147
Loading ...
Loading ...
Loading ...