Loading ...
Loading ...
Loading ...
Personal Settings (Customer-Programmable
Features)
Dimmer
NOTE: The brightness of instrument panel will change
automatically only if the External Light has changed:
External Light On = Night Mode, External Light OFF =
Day Mode. In both cases, (Day or Night) it is possible to
adjust the display brightness as described in
step 1 below.
To adjust the brightness, proceed as follows:
1. Push and release the up or down button to set the
required brightness level.
2. Briefly push and release the MENU button to go
back to the menu screen or push and hold the MENU
(approximately one second) to go back to the main
screen without storing settings.
Speed Buzzer (Speed Limit)
With this function, it is possible to set the car speed limit
(mph or km/h); when this limit is exceeded the driver
is immediately alerted.
To set the speed limit, proceed as follows:
1. Briefly push and release the MENU button. The
display will show the message (Speed Beep).
2. Push and release the up or down button to select
speed limit activation (On) or deactivation (Off).
3. When the function is activated (On), briefly push and
release the MENU button to display the presently set
activation speed. Pushing the up or down buttons
selects the speed limit. Push MENU to confirm
selection.
NOTE: Selection is possible between 20 – 125 mph or
(32 – 201 km/h), depending on the selected unit. The
setting will increase/decrease by five units each time
the up/down button is pushed. Push and hold the
up/down button to increase/decrease the setting rap-
idly. Save the setting by briefly pushing the button
when you approach the required setting.
• Briefly push and release the MENU button to go back
to the menu screen, or push and hold the MENU
button (approximately one second) to go back to the
main screen without storing the settings.
158 UNDERSTANDING YOUR INSTRUMENT PANEL
Loading ...
Loading ...
Loading ...