Loading ...
Loading ...
Loading ...
Failure Indications
A malfunction of the Rear Park Assist sensors or system
is indicated, during REVERSE gear engagement, by the
instrument panel warning icon and message appearing
on the instrument cluster display.
The warning icon is illuminated and a mes-
sage appearing on the instrument cluster dis-
play. Refer to ⬙Instrument Cluster Display⬙ in
“Understanding Your Instrument Panel” for
further information.
The sensors and wiring are tested continuously when
the ignition is in the ON/RUN position. Failures are
indicated immediately if they occur when the system
is ON.
Even if the system is able to identify that a specific
sensor is in failure condition, the instrument cluster
display shall indicate that the Rear Park Assist system is
unavailable, without reference to the sensor in failure
condition. If even a single sensor fails, the entire system
must be disabled. The system is turned off automati-
cally.
Cleaning The Rear Park Assist System
Clean the Rear Park Assist sensors with water, car wash
soap and a soft cloth. Do not use rough or hard cloths.
In washing stations, clean sensors quickly keeping the
vapor jet/high pressure washing nozzles at least
4 inches (10 cm) from the sensors. Do not scratch or
poke the sensors. Otherwise, you could damage the
sensors.
Park Assist System Usage Precautions
NOTE:
• Ensure that the outer surface and the underside of
the rear bumper is clean and clear of snow, ice, mud,
dirt or other obstruction to keep the Rear Park Assist
system operating properly.
• Jackhammers, large trucks, and other vibrations
could affect the performance of Rear Park Assist.
• Clean the Rear Park Assist sensors regularly, taking
care not to scratch or damage them. The sensors must
not be covered with ice, snow, slush, mud, dirt or
debris. Failure to do so can result in the system not
working properly. The Rear Park Assist system might
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105
Loading ...
Loading ...
Loading ...