Loading ...
Loading ...
Loading ...
X
To open all side windows: press button :
to the point of resistance.
X
To open all side windows fully: press
switch : beyond the point of resistance.
X
To close all side windows: pull switch :.
All side windows begin the closing proce-
dure simultaneously. The rear side windows
close after the front side windows.
If, after opening the windows, you close one
side window using the switch in the door con-
trol panel:
R
the front side window closes first and
R
then the corresponding rear side window
closes.
Convenience closing with KEYLESS-GO
G
WARNING
When using the convenience closing feature,
parts of the body could be trapped in the
closing area when a side window is being
closed. There is a risk of injury.
Observe the complete closing procedure
when the convenience closing feature is
operating. Make sure that no body parts are
in close proximity during the closing proce-
dure.
Proceed as follows if someone is trapped:
X
Release the recessed sensor surface on the
door handle.
X
Immediately pull and hold the door handle
and keep the door handle pulled.
The side windows open.
With KEYLESS-GO you can close all side win-
dows simultaneously. The KEYLESS-GO key
must be outside the vehicle. All the doors
must be closed.
X
Touch recessed sensor surface : on the
door handle until the side windows are fully
closed.
i
Make sure you only touch recessed sensor
surface :.
X
To interrupt convenience closing: release
recessed sensor surface : on the door
handle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
X
Close all the doors.
X
Turn the SmartKey to position 1 or 2 in
the ignition lock.
X
Pull the corresponding switch on the door
control panel until the side window is com-
pletely closed (Y page 88).
X
Hold the switch for an additional second.
If the side window opens again slightly:
X
Immediately pull the corresponding switch
on the door control panel until the side win-
dow is completely closed (Y page 88).
X
Hold the switch for an additional second.
If the respective side window remains
closed after the button is released, then it
has been set correctly. If this is not the
case, repeat the steps above.
Side windows
89
Opening and closing
Z
Loading ...
Loading ...
Loading ...