User Manual - Page 304

For SL.

Loading ...
Loading ...
Loading ...
Additional tire pressure values for different
loads can also be found on the tire pressure
table on the inside of the fuel filler flap
(Y page 296).
X
Make sure that the tire pressure is correct
on all four wheels.
X
Ensure that the SmartKey is in position 2
in the ignition lock.
X
Press the = or ; button on the steer-
ing wheel to select the Serv.Serv. menu.
X
Press the 9 or : button to select
Tire PressureTire Pressure.
X
Press a.
The multifunction display shows the current
tire pressure for the individual tires or the
Tire pressure will be displayedTire pressure will be displayed
after driving a few minutesafter driving a few minutes message.
X
Press the : button.
The Use Current Pressures as NewUse Current Pressures as New
Reference ValuesReference Values message appears in the
multifunction display.
If you wish to confirm the restart:
X
Press a.
The Tire Press. Monitor RestartedTire Press. Monitor Restarted
message appears in the multifunction dis-
play.
After driving for a few minutes, the system
checks whether the current tire pressures
are within the specified range. The new tire
pressures are then accepted as reference
values and monitored.
If you wish to cancel the restart:
X
Press %.
The tire pressure values stored at the last
restart will continue to be monitored.
Radio type approval for the tire pres-
sure monitor
Country Radio type approval number
USA FCC ID: MRXMW2433A
FCCIC ID:MRXGG4 This device
complies with part 15 of the
FCC rules and with license
exempt RSS standards of Indus-
try Canada. Operation is subject
to the following conditions. (1)
This device may not cause
harmful interference, and (2)
This device must accept any
interference received, including
interference that may cause
undesired operation. Le present
appareil est conforme d'indus-
trie Canada applicables aux
appareils radio exempts de
licence. L'exploitation est
authorisee aux deux conditions
suivantes. (1) L'appareil ne doit
pas produire de brouillage, et
(2) L'autisatuer de l'appareil
doit accepter tout brouillage
radioelectrique subi, meme si le
brouillage est susceptible d'en
compromettre le fonctionne-
ment. WARNING: Changes or
modifications not expressly
approved by the party responsi-
ble for compliance could void
the user's authority to operate
the equipment. The term "IC:"
before the radio certification
number only signifies Canada
technical specifications were
met.
FCC ID:MRXMC34MA4 This
device complies with part 15 of
the FCC rules and with license
exempt RSS standards of Indus-
try Canada. Operation is subject
to the following conditions. (1)
This device may not cause
harmful interference, and (2)
This device must accept any
interference received, including
interference that may cause
undesired operation. Le present
appareil est conforme d'indus-
trie Canada applicables aux
appareils radio exempts de
302
Tire pressure
Wheels and tires
Loading ...
Loading ...
Loading ...