Loading ...
Loading ...
Loading ...
X
Press DYNAMIC SELECT button : as many
times as necessary until the desired drive
program is selected.
The selected drive program appears in the
multifunction display. After a short period of
time, the display goes out and the symbol
for the selected drive program appears.
In addition, the current drive program set-
tings are displayed briefly in the multimedia
system display.
i
In a few countries, the ECO start/stop
function is deactivated at the factory due to
the available fuel grade. In this case, the
ECO start/stop function is not available in
any drive program, regardless of the display
in the multimedia system display.
Available drive programs:
C Comfort Comfortable and economi-
cal driving characteristics
S Sport Sporty driving characteris-
tics
S+ Sport Plus Particularly sporty driving
characteristics
I Individual Individual settings
E Economy
(vehicles with
adjustable
damping)
Particularly economical
driving characteristics
CV CURVE
(vehicles with
Active Body
Control)
Particularly economical
driving characteristics with
cornering function
Additional information for drive programs
(Y page 138).
DYNAMIC SELECT controller
(Mercedes-AMG vehicles)
General information
Select the drive program using the DYNAMIC
SELECT controller.
Available drive programs:
I Individual Individual settings
C Comfort Comfort-oriented, opti-
mum-economy engine and
transmission settings
S Sport Sporty engine and trans-
mission settings
S+ Sport Plus Particularly sporty trans-
mission settings
Race
Maximum sportiness and
engine and transmission
settings suitable for the
racetrack
Depending on the drive program selected the
following vehicle characteristics will change:
R
the drive (engine management)
R
the transmission management
R
ESP
®
R
the suspension
R
the steering
R
the availability of the ECO start/stop func-
tion
R
the driver assistance systems
R
the availability of gliding mode
Further information for automatic drive pro-
gram characteristics (Y page 138).
Additionally, in drive program I you can config-
ure the respective vehicle characteristics
using the multimedia system. You can find
information about this in the Digital Operator's
Manual.
Each time you start the engine with the Smart-
Key or the Start/Stop button, drive program C
is activated. For further information about
starting the engine, see (Y page 127).
DYNAMIC SELECT controller (Mercedes-AMG vehicles)
133
Driving and parking
Z
Loading ...
Loading ...
Loading ...