F-AR18FSSSCWK1 User Manual

Loading ...

English-52

Installing and connecting the drain hose of the indoor unit

Changing direction of the drain hose

• Thehosewillbexedpermanentlyintopositionafternishingtheinstallationandthegasleaktest;

refer to page 57 for further details.

• Makesuretheinstalleddirectionofthedrainhoseiscorrect.

Inadequate installation may cause condensate water leakage.

• Ifthedrainhoseisroutedinsidetheroom,insulatethehosesothatdrippingcondensationdoesnotdamagethe

furniture or oors.

• DONOTWALLUPTHEDRAINHOSECONNECTION!

Drain hose connection must be easy accessible and serviceable.

• Makesuretheindoorunitisinuprightpositionwhenyoupourwatertocheckforleakage.

Make sure that the water does not overow onto the electrical part.

Pour the water in direction of arrow.

 Direction of the drained water

6. Pass the drain hose under the refrigerant pipe, keeping the drain hose tight.

7. Pass the drain hose through the hole in the wall. Check if it slants

downwards as seen in the picture.

8. Using natural drainage method, check the drainage is normal.

Shield

Drain hose Extension drain hose

Drain hose

Extension

drain hose

Drain hose

Extension

drain hose

40~45 mm

Foam Insulation

20 mm

or more

20 mm

or more

Vinyl Tape

Change the direction only when it is necessary.

1. Detach the rubber cap with the pliers.

2. Detach the drain hose by pulling it and turning to the right.

3. Insert the drain hose by xing it with the screw into the groove of the drain

hose and the outlet of the drain pan.

4. Attach the rubber cap with a screwdriver by turning it to the left until it

xes to the end of the groove.

5. Check for leakage on both side of the drain outlet.

Rubber cap

Drain pan outlet

Drain hose

Screw hole

Screw

A3050 Australia_IB&IM_DB68-05206A_EN.indd 52 2014/12/29 19:07:42

Loading ...

User Manual - Page 52