Loading ...
Loading ...
Loading ...
English-42
Fixing the installation plate
You can select the direction of the drain hose depending on where you want to install the indoor unit. Therefore before xing
the installation plate to a wall or a window frame, you must determine the position of the 65mm hole through which the cable,
pipe and hose pass to connect the indoor unit to the outdoor unit.
Whenfacingthewall,thepipeandcablecanbeconnectedfromthe:
A
C
B
D
D
Direction of pipe
3. Determine the position of the pipe and drain hose hole as seen in the picture and drill the hole with an inner diameter
of 65mm so that it slants slightly downwards.
• Makesuretodrillonlyoneholeafter
choosing the direction of the pipe.
(Unit:mm)
Model A B C D
09/12
36 190 81 36
18/24/30
33 110 110 33
•Right(A)
•Left(B)
•Underside_right(C)
•Rear_rightorleft(D)
B
A
D
C
B
A
D
C
Pipe hole (Ø65 mm) Pipe hole (Ø65 mm)
Wall
<20mm
Plastic
Anchor
4. Fix the indoor unit.
If you x the indoor unit on a wall
(1) Fix the installation plate to the wall giving attention to the weight of the indoor unit.
If you x the indoor unit on a window frame
(1) Determine the positions of the wooden uprights to be attached to the window frame.
(2)Attachthewoodenuprightstothewindowframegivingattentiontotheweightoftheindoorunit.
(3)Attachtheinstallationplatetothewoodenuprightusingtappingscrews.
If you x the indoor unit on a gypsum board
(1) Use stud nder to nd out locations of the studs.
(2) Fix the plate hanger on two studs.
• Ifyoumounttheplatetoaconcretewallusingplasticanchors,makesurethatgaps
between the wall and the plate, created by projected anchor, is less than 20mm.
1. Disassemble the cover panel as described in page 43~44.
2. Remove the Hanger plate from the indoor unit.
(1) Unscrew 2 screws that xes the Hanger plate to the indoor unit.
(2) Push the hooks (on the bottom part of the indoor unit) up to release the installation plate from the hooks that holds it.
(3) Pull the installation plate to release it completely from the indoor unit.
Screw
A3050 Australia_IB&IM_DB68-05206A_EN.indd 42 2014/12/29 19:07:35
Loading ...
Loading ...
Loading ...