Loading ...
Loading ...
Loading ...
English-19
TIMER03
Setting the On/O timer
You can set the air conditioner to turn on/o automatically at desired time.
Setting On timer while the air conditioner is o / O timer while the air conditioner is on
Setting On timer
Remote controller display
Setting O timer
Remote controller display
1. Press the Timer button to select (On/O).
- (On/O) indicator will keep blinking and you can set the time.
2. Press the button to set the time.
- You can set the time in hourly units from 1 hour ~ 12 hours according to AM, PM
and in minute units from 0 ~ 59 minutes.
3. Press the SET button to complete the On/o timer setting.
- (On/O) indicator and the set time of the timer will be displayed on the remote
controller display and the Timer indicator (
)
will be displayed on the indoor
unit display.
- On/O timer setting will be cancelled if you don't press the SET button within
10seconds after setting the time. Therefore, check for the (On/O) indicator on
the remote controller display and the Timer indicator (
)
on the indoor unit
display.
Cancel
f Press the Timer button select (On/O) press the or button
set the timer to
press the SET button.
f Press the Power (
) button.
•
Check the current time on the remote controller before using this function.
•
Thedefaulttimeis1AMontheremotecontroller.Thecurrenttimeisresettodefaulttimeafterchangingthebatteries.
• When On/O timer setting is completed, the set status will be displayed
for 3 seconds, and then only (On/O) indicator will remain on the
remote controller display thereafter.
• If you press the Power button on the indoor unit after setting the
On/O timer from the remote controller, Timer indicator on the indoor
unit display will disappear and the On/O timer will be cancelled. Even
though the On/O timer is cancelled, (On/O) indicator on the remote
controller will remain displayed.
• When the On timer is set while the air conditioner is o, Timer indicator
(
) will be displayed and remain on until the On timer turns on.
• O timer may not work depending on the On/O status of the indoor unit
and the On/O status of the indicator on the remote controller display.
• Only the latest setting timer will be applied between the On Timer/O
Timer and O timer functions.
A3050 Australia_IB&IM_DB68-05206A_EN.indd 19 2014/12/29 19:07:19
Loading ...
Loading ...
Loading ...