Loading ...
Loading ...
Loading ...
English-49
INSTALLATION07
Evacuating the indoor unit
• TheremainingairintheRefrigerationcycle,whichcontainsmoisture,
may cause malfunction on the compressor.
• Alwayscontacttheservicecenteroraprofessionalinstallationagency
for product installation.
• Topreventdirtorforeignsubstancesfromgettingintothepipesduring
installation, do NOT remove the caps completely until you are ready to
connect the pipes.
Thelengthofthepipecanbe:
•Extendedupto:seetablepage38
•Shortenupto:seepage38
Ifyouneedapipelongerthan7.5meters:
• Youmustaddrefrigeranttothepipes;otherwise,theindoorunitmayfreeze.
Cutting or extending the pipe
1. Unscrew the caps at the end of each pipe.
Allinertgasexhaustsfromtheindoorunit.
The indoor unit is supplied with inert gas (nitrogen).
Before installing the unit, check if nitrogen gas ow out of indoor unit.
Ifthisoneisn’ttrue,DONOTINSTALLTHEUNITsinceleakagecouldbeinsidetheindoorunit.
Unscrew the
caps
Pipes
Assembling the hanger screw and guide
1. Cut out the knock-out piece according to the drain hose direction before
xing the indoor unit.
2. Fix the indoor unit on the wall.
Pass the cables, pipes and hose through the hole which would be connected
to the outdoor unit .
3. Use 2 screws to x the indoor unit as shown in the picture.
4. AssembletheGuideintothepositionwheretheknock-outpiecehasbeen
cut out before.
There’rethreehooksontheGuide,theymustbetotallyxedtotheunit.
ThemethodofassemblingtheGuideissamewhetherit’sonrightoronleft.
Left and right each has one
knock-out piece
Guide
Screw
A3050 Australia_IB&IM_DB68-05206A_EN.indd 49 2014/12/29 19:07:40
Loading ...
Loading ...
Loading ...