Loading ...
Loading ...
Loading ...
60
PRODUCT SPECIFICATIONS
Item/Model LG Robot Cleaner
CR3*65**
External Dimensions
13.4 inch x 13.4 inch x 3.5 inch
(340 mm x 340 mm x 89 mm)
Weight
6.6 lb (3 kg)
Power Consumption
58 W
Battery (Fully Charging)
DC 16.8 V
Traveling Velocity
1.38 inch/s (350 mm/s) (Maximum)
Use Time Approx. 100 minutes
(Based on general wooden oor)
Charging Time 3 hours
Main Functions
Turbo Mode/ Learning Mode
Obstacle Sensing / Anti-Plunge function
Scheduled Cleaning / Error Displaying
Navigation / Auto/Manual Recharging
Dry Mopping (cleaning) (Option)
Corner Clean / Voice Messeging
Map Drawing / Spot Cleaning
Repeat Cleaning / My Space Cleaning
Cell by Cell Cleaning / Zigzag Cleaning
Smart Application function
Wireless LAN module Specifications
Model TWFM-L302D
Frequency Range
2412 to 2462 MHz
Output Power (Max)
IEEE 802.11b: 21.89 dBm
IEEE 802.11g: 21.64 dBm
IEEE 802.11n (20 MHz): 21.31 dBm
IEEE 802.11n (40 MHz): 21.43 dBm
※
This equipment is a Class B digital
device that complies with 47 CFR
Parts 2 and 15 of the FCC Rules.
Operation is subject to the following
two conditions: (1) This device may
not cause harmful interference,
and (2) this device must accept
any interference received, including
interference that may cause
undesired operation.
FCC Notice (For transmitter module contained in this product)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause undesired operation
of the device.
Any changes or modications in construction of this device which are not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Loading ...
Loading ...
Loading ...