Loading ...
Loading ...
Loading ...
25
CHOOSING A CLEANING MODE
Select the My Space mode to manually set the
cleaning space.
Selecting the My Space Mode
1. Press the My Space button.
2. Using the arrow buttons on the remote, guide
the Robot Cleaner around the perimeter of the
desired cleaning space.
※
Cleaning space must be smaller than 3
1
/4 ft. (3 m).
• The My Space cleaning mode cannot be activated while the Robot Cleaner is charging
• To change the cleaning mode during operation, press the Stop button and select a
different mode. The cleaning cycle will then start over.
Tip
My Space
3. Once the area is specied, press the Start button.
NOTE: If the cleaning area is not correctly outlined, an error message sounds. Repeat steps 1 and 2
until the cleaning area has been correctly specied.
My Space Cleaning
Loading ...
Loading ...
Loading ...