Loading ...
Loading ...
Loading ...
52
CLEANING THE BRUSH
To assemble the brush, t
the square yellow tab into
the matching yellow slot.
Pushing the brush toward the
yellow end, lower and snap
the white tab (marked with an
R) into the white slot.
Close the brush cover and
push down until the tabs
snap into place.
※
Be careful not to trap the
side brush bristles under
the cover when closing it.
To remove the brush, push
it toward the yellow end.
Lift the white end of the brush
to separate it from the main
unit.
Carefully clean the brush
with a vacuum cleaner or
scissors.
Turn the main power switch
OFF before starting to clean.
Remove the dust bin and put
the Robot Cleaner upside
down on a soft cloth.
Remove any foreign materials,
then press in tabs and pull up
to open the brush cover.
Use the cleaning tool to
clean hair, debris, and
foreign material off the
brush and the two smaller
jockey wheels.
The rotating brush, located on the bottom of the Robot Cleaner, helps collect dust. Clean the brush
using the following sequence.
※
Before turning over the main unit, lay a soft cloth on the floor and remove the Dust Bin.
Otherwise, the main unit can get scratched and dust will fall from the Dust Bin.
Loading ...
Loading ...
Loading ...