Loading ...
Loading ...
Loading ...
20
CHARGING THE BATTERY
The Robot Cleaner returns to the home station at the end of a
cleaning cycle or when its battery is running low.
※
If 10 minutes elapse without the Robot Cleaner moving or the
battery is too low, the Robot Cleaner automatically goes into
standby mode.
※
The power switch has to be in the ON position in order for the
Robot Cleaner to charge at the home station. If the switch is
OFF, an error message sounds.
※
After the battery is fully charged, the Robot Cleaner resumes
cleaning, if interrupted, from the spot where it left off. (Page 21)
※
If the Robot Cleaner is unable to dock to the home station on its rst attempt, it will try again until it
docks successfully.
※
When the Robot Cleaner has completed cleaning the area, it will return to the home station even if
the battery level is not low.
Method 1. Attach the Robot Cleaner to the home
station by aligning it to the front side of
the home station. A melody sounds along
with a message to start charging.
※
The main power switch must be in the
ON position in order for the Robot
Cleaner to charge. An error message is
heard if the power switch is in the OFF
position while mounted to the home
station.
Method 2. Press the HOME button on either the
Robot Cleaner or the remote to return
the Robot Cleaner to the home station to
charge.
Automatic Charging
Manual Charging
Take the following precautions when using the home station:
• If foreign material is caught on the charging terminal, charging may not be activated. Wipe
the terminal from time to time with a dry cloth after the power plug is disconnected.(p53)
• To prevent electric shock or damage to the home station, do not touch the charging
terminal with any metallic objects.
• To avoid fire or electric shock, never disassemble or modify the home station.
• Do not to place the Robot Cleaner, the home station or the power plug near a heat source.
Tip
Manually charge the Robot Cleaner before using it for the rst time.
※
If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually
charged by pressing the Home button, it may take slightly longer to find the home station.
※
If the Robot Cleaner is within 4 in. (10 cm) of the front of the charging terminal while the power is
turned on from Standby, it will automatically be returned to the home station and charging will begin.
Loading ...
Loading ...
Loading ...