Loading ...
Loading ...
Loading ...
Overview
Storing
1. Switch on the ignition.
2. Set the desired position.
3.
Press button. The LED in the but‐
ton lights up.
4. Press selected button 1 or 2 while the LED
is lit. The LED goes out.
Button was pressed inadvertently:
Press button again.
The LED goes out.
Calling up settings
The stored position is called up automatically.
Press selected button 1 or 2.
The procedure stops when a switch for setting
the seat or one of the memory buttons is
pressed.
While driving, the seat position adjustment on
the driver's side is interrupted after a short
time.
Calling up of a seat position
deactivated
After a brief period, calling up stored seat posi‐
tions is deactivated to save battery power.
To reactivate calling up of a seat position:
▷ Open or close the door or tailgate.
▷ Press a button on the remote control.
▷ Press the Start/Stop button.
Mirrors
Exterior mirrors
General information
The mirror on the front passenger side is more
curved than the driver's side mirror.
The mirror setting is stored for the driver pro‐
file currently in use. When the vehicle is un‐
locked via the remote control, the position is
automatically retrieved if the function, refer to
page 51, is activated for this purpose.
The current exterior mirror position can be
stored using the memory function, refer to
page 66.
Safety information
WARNING
Objects reflected in the mirror are closer
than they appear. The distance to the traffic
behind could be incorrectly estimated, for in‐
stance while changing lanes. There is a risk of
an accident. Estimate the distance to the traffic
behind by looking over your shoulder.◀
Overview
1 Settings
2 Left/right, Automatic Curb Monitor
3 Folding in and out
Selecting a mirror
To change over to the other mirror:
Seite 67
Settings Controls
67
Online Edition for Part no. 01402983801 - X/17
Loading ...
Loading ...
Loading ...