Loading ...
Loading ...
Loading ...
tion.There is a risk of injuries or danger to life.
Do not allow more than one person to wear a
single safety belt. Infants and children are not
allowed on an occupant's lap, but must be
transported and secured in designated child
restraint systems.◀
WARNING
The efficacy of safety gear, including
safety belts, can be limited or lost when safety
belts are fastened incorrectly. An incorrectly
fastened safety belt can cause additional inju‐
ries, for instance in the event of an accident or
during braking and evasive maneuvers. There
is a risk of injuries or danger to life. Make sure
that all occupants are wearing safety belts cor‐
rectly.◀
WARNING
With a rear backrest that is not locked,
the protective function of the middle safety
belt is not guaranteed. There is a risk of inju‐
ries or danger to life. If you are using the mid‐
dle safety belt, lock the wider rear seat back‐
rest.◀
WARNING
The efficacy of safety gear, including
safety belts, may not be fully functional or fail
in the following situations:
▷ The safety belts or safety belt buckles are
damaged, soiled, or changed in any other
way.
▷ Belt tensioners or belt retractors were
modified.
Safety belts can be imperceptibly damaged in
the event of an accident. There is a risk of inju‐
ries or danger to life. Do not modify safety
belts, safety belt buckles, belt tensioners, belt
retractors or belt anchors and keep them
clean. Have the safety belts checked after an
accident at the dealer’s service center or an‐
other qualified service center or repair shop.◀
Correct use of safety belts
▷ Wear the safety belt twist-free and tight to
your body over your lap and shoulders.
▷ Wear the safety belt deep on your hips
over your lap. The safety belt may not
press on your stomach.
▷ Do not rub the safety belt against sharp
edges, or guide it or jam it in across hard or
fragile objects.
▷ Avoid thick clothing.
▷ Re-tighten the safety belt frequently up‐
ward around your upper body.
Buckling the safety belt
1.
Slowly guide the safety belt out of the
holder when fastening it.
2. Insert the tongue plate into the safety belt
buckle. The safety belt buckle must en‐
gage audibly.
To ease accessibility to the safety belt buckle,
an adjustable slider is available on the belt to
help position the buckle when not in use.
When the safety belt is buckled, the belt strap
is automatically tightened once after the vehi‐
cle drove off.
Unbuckling the safety belt
1.
Hold the safety belt firmly.
2. Press the red button in the belt buckle.
3. Guide the safety belt back into its roll-up
mechanism.
Seite 63
Settings Controls
63
Online Edition for Part no. 01402983801 - X/17
Loading ...
Loading ...
Loading ...