Loading ...
Loading ...
Loading ...
System limits
The automatic headlight control cannot serve
as a substitute for your personal judgment of
lighting conditions.
For example, the sensors are unable to detect
fog or hazy weather. To avoid safety risks un‐
der these conditions, you should always switch
on the lights manually.
Daytime running lights
General information
Position of switch:
, ,
The daytime running lights light up when the
ignition is switched on. After the ignition is
switched off, the parking lights light up in posi‐
tion .
Activating/deactivating
In some countries, daytime running lights are
mandatory, so it may not be possible to deacti‐
vate the daytime running lights.
Via iDrive:
1.
"Settings"
2. "Lighting"
3. "Daytime running lamps"
The setting is stored for the driver profile cur‐
rently used.
Adaptive light functions
Concept
Adaptive light functions enable dynamic illumi‐
nation of the roadway.
General information
The adaptive light functions may consist of
one system or multiple systems, depending on
the equipment version:
▷ Adaptive Light Control, refer to page 115.
▷ Cornering light, refer to page 115.
Activating
Position of switch:
The adaptive light functions are active when
the engine is running.
Adaptive Light Control
Depending on the steering angle and other pa‐
rameters, the light from the headlight follows
the course of the road.
To avoid blinding oncoming traffic, the Adap‐
tive Light Control does not swivel to the oppo‐
site lane when the vehicle is at a standstill.
Cornering light
In tight curves, for instance on mountainous
roads or when turning, an additional, cornering
light is switched on that lights up the inside of
the curve better when the vehicle is moving
below a certain speed.
The cornering light is automatically switched
on depending on the steering angle or the use
of turn signals.
When driving in reverse, the cornering lights
may be automatically switched on regardless
of the steering angle.
Adaptive headlight range
control
The adaptive headlight range control compen‐
sates for acceleration and braking operations
in order not to blind the oncoming traffic and to
achieve optimum illumination of the roadway.
High-beam Assistant
Concept
The high-beam Assistant detects other traffic
participants early on and automatically
Seite 115
Lights Controls
115
Online Edition for Part no. 01402983801 - X/17
Loading ...
Loading ...
Loading ...