Loading ...
Loading ...
Loading ...
3. Fold open the holder.
4. Slide wiper blade out of the wiper arm.
5. Insert the new wiper blade and press it on
until it you hear it snap into the holder.
6. Fold down the wipers.
Rear
1.
Fold up the wiper arm.
2. Turn the wiper blade all the way back.
3. Continue turning the wiper blade all the
way so that it pops out of the holder.
4. Press the new wiper blade into the holder
until you hear it snap into place.
5. Fold the wipers in.
Light/bulb replacement
General information
Lights and bulbs
Lights and bulbs make an essential contribu‐
tion to vehicle safety.
The vehicle manufacturer recommends that
you have the relevant work carried out a deal‐
er’s service center or another qualified service
center or repair shop.
A spare light box is available from a dealer’s
service center or another qualified service cen‐
ter or repair shop.
Follow the safety information, refer to
page 265.
Light-emitting diodes (LEDs)
Some items of equipment use light-emitting
diodes installed behind a cover as a light
source. These light-emitting diodes are related
to conventional lasers and are officially desig‐
nated as Class 1 light-emitting diodes.
Follow the safety information, refer to
page 265.
Safety information
Lights and bulbs
WARNING
Bulbs can get hot during operation. Con‐
tact with the bulbs can cause burns. There is a
risk of injury. Only change bulbs after they
have cooled off.◀
WARNING
Work on switched-on lighting systems
can cause short circuits. There is a risk of in‐
jury or risk of damage to property. When work‐
ing on the lighting system, switch off the lights
in question. If necessary, heed the bulb manu‐
facturer's instructions.◀
Seite 265
Replacing components Mobility
265
Online Edition for Part no. 01402983801 - X/17
Loading ...
Loading ...
Loading ...