User Manual - Page 168

For 2018 BMW X5.

Loading ...
Loading ...
Loading ...
Switching on/off
Switching on automatically
The system switches on automatically in the
following situations:
If selector lever position R is engaged
when the engine is running.
The rearview camera also switches on.
If equipped with front PDC: when obsta‐
cles are detected behind or in front of the
vehicle by PDC and the speed is slower
than approx. 2.5 mph/4 km/h.
You may switch off automatic activation when
obstacles are detected. Via iDrive:
1.
"Settings"
2. "Parking"
3. Select setting.
The setting is stored for the driver profile
currently used.
If necessary, switch off automatic PDC activa‐
tion on obstacle detection, for instance in vehi‐
cle washes, to reduce false alarms.
Automatic deactivation during forward
travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
With front PDC: switching on/off
manually
Press park assistance button.
On: the LED lights up.
Off: the LED goes out.
The rearview camera image is displayed if the
reverse gear is engaged when pressing the
park assistance button.
WARNING
Signal tones
An intermittent tone indicates when the vehi‐
cle is approaching an object. E.g., if an object
is detected to the left rear of the vehicle, a sig‐
nal tone sounds from the left rear speaker.
The shorter the distance to the object, the
shorter the intervals.
If the distance to a detected object is less than
approx. 10 inches/25 cm, a continuous tone is
sounded.
With front PDC: if objects are simultaneously
located both in front of and behind the vehicle,
an alternating continuous signal is sounded.
The signal tone is switched off, when selector
lever position P is engaged on vehicles with
Steptronic transmission.
Volume
The ratio of the PDC signal tone volume to the
entertainment volume can be adjusted.
Via iDrive:
1.
"Multimedia", "Radio" or "Settings"
2. "Tone"
3. "Volume settings"
4. "PDC"
5. Turn the Controller until the desired set‐
ting is selected.
6. Press the Controller.
Settings are stored for the profile currently
used.
Visual warning
The approach of the vehicle to an object can
be shown on the Control Display. Objects that
are farther away are already displayed on the
Control Display before a signal sounds.
A display appears as soon as Park Distance
Control (PDC) is activated.
Seite 168
Controls Driving comfort
168
Online Edition for Part no. 01402983801 - X/17
Loading ...
Loading ...
Loading ...