Loading ...
Loading ...
Loading ...
YOUR 406 IN DETAIL
109
Changing the battery
of the remote control
The information 'battery flat' is
given by an audible signal accompa-
nied by a message on the
multi–function display.
To replace the battery, unclip the
casing using a coin at the ring
(CR2016/3 volt battery).
If the remote control does not work
after the battery has been changed,
reprogramme the remote control.
Confidential card
The confidential card contains the
identification code necessary for any
work carried out by a PEUGEOT
dealer on the system. This code is
hidden by a film which should be
removed only if necessary.
Keep your card in a safe place,
never inside the vehicle.
Programming the remote control
☞ Switch off the ignition.
☞ Switch the ignition on again.
☞ Immediately press button A.
☞ Switch off the ignition and
remove the remote control key
from the ignition lock. The remote
control is now working again.
Loading ...
Loading ...
Loading ...