Loading ...
Loading ...
Loading ...
MAINTENANCE OF YOUR 406
37
- The jack is fitted with a system
which enables it to be folded or
unfolded rapidly.
- Take the jack from the toolkit and
fold it by pressing the ends A.
- Place the jack at one of the loca-
tions E underneath the vehicle (as
close as possible to the wheel to
be changed) and unfold it by pul-
ling the ends A.
- Extend the jack using the wheel-
brace 1 and the extension 3.
- Take out a wheel bolt at the top
and fit the centralising tool 2.
- Loosen the wheel bolts and remo-
ve the wheel.
Fitting a wheel
- Position the wheel using the cen-
tralising tool to assist you.
- Tighten the bolts by hand, and
remove the centralising tool.
- Partly tighten the bolts using the
wheelbrace.
- Fold the jack and remove it.
- Fully tighten the wheel bolts using
the wheelbrace.
- Replace the wheel trim, except in
the case of a space-saver wheel,
by starting with the valve and pres-
sing on using the palm of your
hand.
For your safety, always
change the wheel:
- on level, stable, non-slippery
ground,
- with the handbrake applied,
- with first or reverse gear enga-
ged (position P for the automatic
gearbox).
Never go underneath a vehicle
which is supported only by a jack
(use a ramp).
After changing the wheel
- have the tightening of the bolts
and the tyre pressure checked
by a PEUGEOT dealer as soon
as possible,
- have the punctured tyre repai-
red and refit it to the vehicle as
soon as possible.
7 seater Estate model
The space-saver spare wheel fit-
ted with a 125/80R15 tyre must
only be used as a short-term mea-
sure. Tyre pressure is 61 lb
in2 (4.2 bars), maximum speed is
50 mph (80 km/h).
Loading ...
Loading ...
Loading ...