Loading ...
Loading ...
Loading ...
8-11
TROUBLESHOOTING
Contents
HOW TO REMOVE MISFEEDS
If you require more information when reading the instructions in the touch panel, see the paper misfeed illustrations
below. Refer to the illustration below and then go to the appropriate illustration (1 to 10) for your situation.
☞ (1): page 8-11, (2)-(8): page 8-12, (9)-(10): page 8-14
(1) Original misfeed
When using the MX-B402
Open the document feeder
cover and remove the paper
feed roller.
If it is difficult to remove misfed
paper, remove the paper feed
roller. To remove the paper
feed roller, see "Removing the
paper feed roller".
Pull out the document feeder
tray and remove the misfed
paper.
Open the automatic
document feeder and
remove the original.
Removing the paper feed roller
Lift up the knob that holds
the roller shaft.
Pull down the release lever.
Remove the shaft rotating
the roller cover upward and
remove the shaft.
When removing a misfeed or closing a cover, tray, or the finisher, take care that your fingers do not become pinched.
(1) (2) (10)
(8) (9)
(3)
(4)
(5)
(6), (7)
(1) (2) (10)
(8) (9)
(3)
(4)
(5)
(6), (7)
When using the MX-B402 When using the MX-B402SC
After removing the misfeed, open and close the
automatic document feeder (or the document feeding
area cover or document feeder tray) to clear the
misfeed display from the touch panel.
Paper
feed roller
• If the roller cover is not pointing straight up when
the shaft is removed, a failure may occur.
• Carefully pull the misfed paper out without tearing it.
Loading ...
Loading ...
Loading ...