Loading ...
Loading ...
Loading ...
Consumer SupportInstallation Instructions Troubleshooting TipsOperating InstructionsSafety Instructions
49
GEAppliances.com
Problem Possible Causes What To Do
Oven will not self-clean The oven temperature is too • Allow the range to cool to room temperature and
high to set a self-clean operation. reset the controls.
Oven controls improperly set. • See the Using the self-cleaning oven section.
On models with a door latch, • Make sure you move the door latch handle all the
the oven door is not in the way to the right.
locked position.
“Crackling” or This is the sound of the • This is normal.
“popping” sound metal heating and cooling
during both the cooking and
cleaning functions.
Excessive smoking Excessive soil. • Press the CLEAR/OFF pad. Open the windows to
rid the room of smoke. Wait until the LOCKED DOOR
light goes off. Wipe up the excess soil and reset the
clean cycle.
Oven door will not open Oven too hot. • Allow the oven to cool below locking temperature.
after a clean cycle
Oven not clean after a Oven controls not properly set. • See the Using the self-cleaning oven section.
clean cycle
Oven was heavily soiled. • Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
“LOCK DOOR” flashes The self-clean cycle has been • Close the oven door.
in the display selected but the door is not
closed.
LOCKED DOOR light The oven door is locked • Press the CLEAR/OFF pad. Allow the oven to cool,
is on when you want because the temperature and then, on models with a door latch, unlock
to cook inside the oven has not the door.
dropped below the
locking temperature.
“F—and a number or On models with a door latch, • The latch may have been moved, even if only slightly,
letter” flash in the display if a function error code appears from the locked position. Make sure the latch is moved
during the self-cleaning cycle, to the right as far as it will go.
check the oven door latch.
You have a function error code. • Press the CLEAR/OFF pad. Allow the oven to cool for one
hour. Put the oven back into operation.
If the function code repeats. • Disconnect all power to the range for 5 minutes
and then reconnect power. If the function error
code repeats, call for service.
Oven door will not Oven is too hot. • Allow the oven to cool below locking temperature.
unlock (on models with Do not lock the door with the door latch except when
a door latch) using the self-clean feature.
“Door” appears in the Self-cleaning cycle has been •Move the latch handle all the way to the right.
display (on models with selected but the latch handle
a door latch) was not moved all the way
to the right.
Latch handle was moved to •Move the latch handle to the right only when setting
the right but a program other the self-cleaning cycle.
than self-cleaning was selected.
Loading ...
Loading ...
Loading ...