Loading ...
Loading ...
Loading ...
Consumer SupportInstallation Instructions Troubleshooting TipsOperating InstructionsSafety Instructions
43
Quality of Flames
The combustion quality of burner flames needs to
be determined visually.
If burner flames look like (A), call for service. Normal burner
flames should look like (B) or (C), depending on the type of
gas you use.
With LP gas, some yellow tipping on outer cones is
normal.
(C) Soft blue flames –
Normal for
natural gas
(B) Yellow tips on
outer cones –
Normal for LP gas
(A) Yellow flames –
Call for service
Check Ignition of Oven Burner
The oven is designed to operate quietly and
automatically. To operate the oven, press the BAKE
pad and then press the +/– or number pads until
350° appears in the display. Press the START pad.
After 30–90 seconds, the oven burner will ignite
and burn until the set temperature is reached. The
oven burner will continue to cycle on and off as
necessary to maintain the oven at the temperature
indicated by the display.
To check ignition of the broil burner, press the
BROIL HI/LO pad and then the START pad. After
30–90 seconds, the broil burner will ignite.
Electric ignition models require electrical power
to operate. In case of a power outage, the oven
burners on these models cannot be lit manually
with a match. Gas will not flow unless the glow bar
is hot.
If the oven is in use when a power outage occurs,
the burner will shut off and cannot be re-lit until
power is restored.
Loading ...
Loading ...
Loading ...