Loading ...
Loading ...
Loading ...
Consumer SupportOperating InstructionsSafety Instructions Installation Instructions Troubleshooting Tips
11
Using the oven controls.
Throughout this manual, features and appearance may vary from your model.
Oven Control, Clock and Timer Features and Settings
BAKE Pad
Press this pad to select the bake function.
BROIL HI/LO Pad
Press this pad to select the broil function.
Function Indicators
Light up to show whether the oven is in the
bake, broil or self-clean mode.
Oven Temperature and Broil Display
Shows the oven temperature or the broil
setting selected.
Time Display
Shows the time of day, the times set for the
timer or automatic oven operation.
Program Status
Words light up in the display to indicate
what is in the time display. Programmed
information can be displayed at any time by
touching the pad of the operation you want
to see. For example, you can display the
current time of day while the timer is
counting down by pressing the CLOCK pad.
If “F—and a number or letter” flash in the display
and the oven control signals, this indicates a function
error code.
On models with an oven door latch, if the function error
code appears during the self-cleaning cycle, check the oven
door latch. The latch handle may have been moved, even if
only slightly, from the latched position. Make sure the latch
is moved to the right as far as it will go.
Press the CLEAR/OFF pad. Allow the oven to cool for one
hour. Put the oven back into operation. If the function error
code repeats, disconnect the power to the range and call
for service.
If a flashing time of day is in the display, you have
experienced a power failure. Reset the clock.
If your oven was set for a timed oven operation when
the power outage occurred, the clock and all programmed
functions must be reset.
COOKING TIME Pad
Press this pad and then press the INCREASE
or DECREASE pads to set the amount of time
you want your food to cook. The oven will
shut off when the cooking time has run out.
START TIME Pad
Use along with the COOKING TIME or SELF
CLEAN pad to set the oven to start and stop
automatically at a time you set.
CLOCK Pad
Press this pad before setting the clock. The
time of day will flash in the display when the
oven is first turned on.
KITCHEN TIMER ON/OFF Pad
Press this pad to select the timer feature.
START Pad
Must be pressed to start any cooking or
cleaning function.
DECREASE Pad
Short taps to this pad will decrease the time
or temperature by small amounts. Press and
hold the pad to decrease the time or
temperature by larger amounts.
INCREASE Pad
Short taps to this pad will increase the time
or temperature by small amounts. Press
and hold the pad to increase the time or
temperature by larger amounts
CLEAR/OFF Pad
Press this pad to cancel ALL oven operations
except the clock and timer.
SELF CLEAN Pad
Press this pad to select the self-cleaning
function. See the Using the self-cleaning oven
section.
(on models with INCREASE [+] and DECREASE [–] pads only)
GEAppliances.com
Loading ...
Loading ...
Loading ...