Loading ...
Loading ...
Loading ...
Special features of your oven control. (on some models)
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is pressed. This continuous
6 second beep may be canceled.
To cancel the 6-second beep:
Press the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until
the display shows SF.
Press the KITCHEN TIMER ON/OFF
pad. The display shows CON BEEP
(continuous beep). Press the KITCHEN
TIMER ON/OFF pad again. The display
shows BEEP. (This cancels the one
beep every 6 seconds.)
Press the START pad.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Press the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until
the display shows SF.
Press the CLOCK pad once. The display
will show 12 hr. If this is the choice you
want, press the START pad.
Press the CLOCK pad again to change
to the 24-hour military time clock.
The display will show 24 hr. If this is the
choice you want, press the START pad.
Press the CLOCK pad again to black out
the clock display. The display will show
OFF. If this is the choice you want,
press the START pad.
NOTE: If the clock is in the blackout mode you will
not be able to use the Delay Start function.
+
+
Appearance may vary.
Appearance may vary.
Operating Instructions Safety InstructionsInstallation InstructionsTroubleshooting Tips
Consumer Support
14
Changing the Speed of the Increase or Decrease Pads
(on some models)
As you use the INCREASE or DECREASE pads when
setting a time or temperature, you may notice the
display changes slowly. This special feature allows
you to change the speed.
To set the speed you prefer, follow the steps
below.
Press the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until
the display shows SF.
Press the INCREASE pad. The display
will show you a set speed between
1 and 5.
Press the INCREASE pad to increase
the speed up to the number 5.
Press the DECREASE pad to decrease
the speed down to the number 1.
Press START to activate the setting and
leave the control set in this special
features mode.
+
or
Loading ...
Loading ...
Loading ...