Loading ...
Loading ...
Loading ...
Frequently asked questions
68
Cleaning the drain pump and
non-return valve
If the water has not been pumped away
at the end of a program, the drain pump
or the non-return valve might be
blocked. They are, however, easy to
clean.
Disconnect the dishwasher from the
electrical supply (switch the
dishwasher off, unplug it or
disconnect or disable the fuse/circuit
breaker).
Take the filter combination out of the
wash chamber (see "Cleaning and
care", "Cleaning the filters").
Scoop the water out of the wash
chamber using a suitable container or
utensil.
Press the catch for the non-return
valve inwards .
Lift out the non-return valve and
rinse it well under running water.
Remove all foreign objects from the
non-return valve.
The drain pump is located under the
non-return valve (see arrow).
Remove all foreign objects from the
drain pump carefully (watch out for
glass splinters which are particularly
difficult to detect). Turn the drain
pump impeller by hand to check that
there are no more obstructions. You
will feel a little resistance when you
turn the impeller.
Carefully reinsert the non-return valve
and secure it with the locking clamp.
Make sure the locking clamp
clicks into place!
Be careful not to damage any
delicate components when cleaning
the drain pump and the non-return
valve.
Loading ...
Loading ...
Loading ...