Loading ...
Loading ...
Loading ...
Operation
39
Time display
Before the program starts, the display
shows the duration of the selected
program in hours and minutes. The
remaining runtime is displayed during
the program.
Each program phase is indicated by a
symbol:
Pre-rinse
Main wash
Interim rinse
Final rinse
Drying
Finished
The displayed program duration may
vary with the same program. It is
influenced by, among other things, the
temperature of the incoming water, the
reactivation process of the water
softener and the amount of dishes.
When a program is selected for the first
time, the display shows an average
program duration for warm water.
The program duration changes if the
electrical connection is changed.
Standby
To save energy, the dishwasher will
switch to Standby mode a few minutes
after the last time a button has been
pressed or a few minutes after the end
of the program. The display and the
indicator lights will go out and only the
Start/Stop indicator will flash slowly.
Press any button to switch the
display back on.
If the dishwasher is not switched off at
the end of the program, it will switch off
completely after a few minutes in
Standby mode (see "Settings menu,
Optimize standby").
The dishwasher will not switch to
Standby mode while a program is
running, if salt or rinse aid needs to
be replenished or there is a fault.
You can switch off the refill indicators
to replenish salt and rinse aid so that
the dishwasher will go into Standby
despite a lack of salt or rinse aid (see
"Settings menu, Refill display").
You cannot switch off fault
messages.
Loading ...
Loading ...
Loading ...