Loading ...
Loading ...
Loading ...
Commissioning
20
Standard settings
Switch the dishwasher on with the
button.
If the dishwasher is being turned on for
the first time, the welcome screen will
appear.
Language
The display will change automatically to
the screen for setting the language.
See "Guide to the appliance, Display"
for more information about the display
and controls.
Select the desired language and
press the center button to confirm.
A check will appear next to the
language that has been set.
Water hardness
The display changes to the screen for
setting the water hardness.
– The dishwasher must be
programmed to match exactly the
hardness of your water.
– Your local water supplier can tell you
the water hardness level in your area.
– Where the water hardness fluctuates,
e.g. between 18 - 26 gr/gal (17-
25°d - German scale), always
program the dishwasher to the higher
value (26 gr/gal or 25°d in this
example).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
____________ gr/gal (°d)
The dishwasher is programmed at the
factory for a water hardness level of
15°gr/gal (15 d - German scale).
Select the water hardness level for
your water supply and confirm with
the center button.
See "Settings menu, Water hardness"
for more information.
The following two messages Refill
rinse aid and Refill salt may then
appear in the display.
Press any button to confirm them. The
display will change to show the main
menu.
Loading ...
Loading ...
Loading ...