Loading ...
Loading ...
Loading ...
Cleaning and care
56
Filter system
The filter combination in the base of the
wash chamber prevents food from
being redeposited on dishes. It also
protects the circulation pump from
damage caused by foreign objects.
This dishwasher must not be
used without all the filters in place!
Collection of coarse soil may cause the
filters to clog. The level of soiling and
time it takes before the filters need
cleaning will vary depending on use.
The message Check filters will appear in
the display after every 50 program
cycles (factory default setting).
You can turn off the filter check or set
the interval for this message to appear
between 30 to 60 program cycles (see
"Settings menu, Check filter").
Check the filter combination.
Clean it if necessary.
Confirm the message with the center
button.
The last selected program will appear
briefly in the display and the
appropriate indicator light will come on.
After a short while, the estimated
program duration will be displayed.
Cleaning the filters
Turn the dishwasher off.
Turn the handle counterclockwise to
release the filter combination
Lift the filter combination out of the
dishwasher . Remove any coarse
particles and rinse the filter well
under running water. Use a nylon
brush if necessary.
Make sure that when cleaning
the filters, no coarse soil falls into the
circulation system,
This could cause a blockage.
Loading ...
Loading ...
Loading ...