Loading ...
Loading ...
Loading ...
Installation
Installation
English26
STEP 3 Adjust the levelling legs
1. Gently slide the washer into position.
Excessive force may damage the
levelling legs.
2. Level the washer by manually adjusting
the levelling legs.
3. When levelling is complete, tighten the
nuts using the wrench.
NOTE
An adjustable wrench or 17 mm open-
end wrench is required to loosen or
tighten the leveling legs.
STEP 4 Put the rubber cups on the legs (Only for soft oor or surface)
To protect a soft oor or surface, use the
provided rubber cups. You don’t need to
use the rubber cups on a hard oor or on a
pedestal.
1. Let two or more persons hold both
sides of the washer.
2. While slanting the washer to one side,
put the rubber cups under each leg of
the washer one by one.
CAUTION
Make sure you have two or more persons
insert the rubber cups. Otherwise, the
washer may fall, causing physical or
property damage.
FlexWash_WV9900M_DC68-03768A-04_EN.indd 26 2017-05-22 7:03:28
Loading ...
Loading ...
Loading ...