CLA110NGFCY-CH User Manual

Loading ...

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity before servicing. Check appliance is safe when you have nished.

Check the performance.

5.6 To Change the Oven Solenoids

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Move the cooker forward to gain access to the rear. See

‘Moving Your Cooker’ in the installation section.

Remove the screws securing the cover and lift clear.

Disconnect the solenoid leads and remove the earth lead

from the earth screw. Unclip the wires from the cable ties.

Disconnect the pipe tube nuts to the solenoid unit. Unscrew

the locking nut from the end connector and the remove

solenoid unit. Fit the new unit to mounting bracket and x in

place with locking nut. Ret the tube nut connections.

Replace the leads (refer to the wiring diagram). Replace the

wires in cable ties. Check the appliance is gas sound. Ret the

cover box. Check for the correct operation of the solenoids.

5.7 To Change an Oven Electrode

DISCONNECT FROM THE ELECTRICITY SUPPLY.

Remove the oven burner (see 5.2). Remove the screw and

nut securing the electrode to the burner. Pull the lead from

back of electrode and t to the new electrode. Fit the new

electrode to the burner.

Reassemble in reverse order. Check the ignition.

Doors

6.1 To Remove the Grill Door

Remove the left-hand side panel (see 1.2). Remove the plinth

(4 screws) and the central vertical cover (5screws). Remove

the 2 countersunk screws (1 each side) securing the grill

hinge arms to the front of the grill chamber.

Note: The arms are spring tensioned. Carefully remove the

grill door. Retain the gaskets.

Reassemble in reverse order, making sure that the gasket

is tted between the hinge arm and the front of the grill

chamber.

6.2 To Replace an Oven Door

Open the oven door. Support the door and loosen the 2

screws securing the upper hinge and gasket to the cooker

front (Fig. 10.9).



The door is heavy, so take care.

Support the door and remove the screw nearest the hinge

pin (Fig. 10.10). Swing the hinge up and away from the

door hinge pin. Lift the door away from the lower hinge and

remove.

Reassemble in reverse order.

ArtNo.320-0001 Door hinges

Fig. 10.9 Fig. 10.10

Loading ...

Falcon CLA110NGFCY-CH 110cm Freestanding Natural Gas Oven/Stove

User Manual - Page 43