CLA110NGFCY-CH User Manual

Loading ...

INSTALLATION

Check the appliance is gas sound when you have nished.

Fixed Wiring



Disconnect from the mains supply.

For connection to xed wiring, i.e. exible conduit, Remove

the electrical terminal cover on the back panel (Fig. 8.13).

Remove the M4 screw securing the reducer plates to the

conduit box (Fig. 8.14). Fit the conduit box to the cooker

using the two M5 screw ttings located at the top of the box

and the M4 screw (Fig. 8.15).

The conduit box cover is reversible. Fit the reducer plates, if

required (Fig. 8.16). Feed the cable through the conduit box

and secure in place with the cable clamp.

Connect the mains cable to the correct terminals for your

electrical supply type (Fig. 8.17). Check that the links are

correctly tted and that the terminal screws are tight.

Fit the cover to the conduit box.

Conduit box

M4 screw

M5 screws

Reducer plates

M4 screw

Reducer plates

Reversible conduit box cover

ArtNo.132-0002 - 3 phase 240/415Vac 50Hz

3-phase 400 V

50 Hz

Fig. 8.13

Fig. 8.14

Fig. 8.15

Fig. 8.16

Fig. 8.17

Loading ...

Falcon CLA110NGFCY-CH 110cm Freestanding Natural Gas Oven/Stove