Loading ...
Loading ...
Loading ...
Operating28
Operating
4
Listening to FM radio
You can listen to FM broadcast through the built-
in tuner. Before operation, make sure you have
connected the FM antenna to the unit. (Page 18)
Automatic tuning
1. Press RADIO to select tuner (FM). The last
received station is tuned in.
You can also press FUNCTION on the front
panel.
2. Press TUNING - or TUNING + for more than 2
seconds.
Press TUNING - for more than 2 seconds to scan
from high to low.
Press TUNING + for more than 2 seconds to scan
from low to high.
The unit stops scanning whenever a station is
received.
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL +/- on the
remote control.
Manual tuning
Press TUNING - or TUNING + briey and repeatedly
on the FM mode to select a station you want.
Improving poor FM reception
Press B (blue) (MONO/STEREO) colored button on
the remote control. This will change the tuner from
stereo to mono and usually improve the reception.
Presetting radio stations
You can preset up to 50 FM stations.
You can easily tune in the stations you often listen
to.
1. Press RADIO to select tuner (FM). The last
received station is tuned in.
You can also press FUNCTION on the front
panel.
2. Tune in the station that you want to preset
using Automatic tuning or Manual tuning.
3. Press ENTER (
b
).
A preset number ashes on the display window
for a few seconds. When a preset number
ashes, do the step 4.
4. Press PRESET - or PRESET+ to select a preset
number you want.
If a preset number is not ashed before you
select the preset number, start again from the
step 3.
5. Press ENTER (
b
) again.
The station is stored to the selected preset
number. If a preset number is not ashed before
you press ENTER (
b
), start again from the step
3.
6. Repeat the steps 2 to 5 to preset another
station.
Tuning to preset stations
Before tuning to preset stations, make sure you
preset radio stations.
1. Press RADIO to select tuner (FM). The last
received station is tuned in.
You can also press FUNCTION on the front
panel.
2. Press PRESET - or PRESET+ repeatedly to select
the preset station you want.
Each time you press the button, you can select
a preset station.
Loading ...
Loading ...
Loading ...