Loading ...
Loading ...
Loading ...
302 Fuses and bulbs
– Unlock the retaining tabs
A
of the bulb holder, following the
direction of arrows
1
and
2
⇒ Fig. 196.
– Remove the bulb holder by turning it in the direction of arrow
3
⇒ Fig. 196.
Changing bulbs
Fig. 197 Position of the
bulbs in the bulb holder
– Lightly press the defective bulb into the bulb holder ⇒ Fig. 197
1
, then turn it to the left
2
and remove it.
– Fit the new bulb, pressing it into the bulb holder and turn it to
the right as far as it will go.
– Use a cloth to remove any fingerprints from the glass part of the
bulb.
– Check that the new bulb works properly.
– Replace the bulb holder.
Note
For LED pilots, you can only change the fog or reverse bulb, on the left or
right guide.
Fitting the bulb holder
– Install the bulb holder making sure that locking clips ⇒ Fig. 196
A
are properly clipped on.
– Replace the cover of the rear lid lining ⇒ Fig. 195.
Loading ...
Loading ...
Loading ...