Loading ...
Loading ...
Loading ...
Frequently asked questions
64
Faults with water intake or drainage
Problem Possible cause and solution
The In-operation
indicator is flashing
quickly. The buzzer is
sounding. One of the
following faults appears
in the display:
Open water supply
The water supply is turned off.
Open the water supply valve all the way.
Water intake
Before remedying the fault:
Turn the dishwasher off with the button.
There is a problem with the water intake.
Open the water supply valve all the way.
Check the water inlet filter and clean it if necessary
(see "Maintenance").
The water pressure at the intake is lower than 4.35
psi (0.3bar).
Contact a plumber.
Drain
Before remedying the fault:
Turn the dishwasher off with the button.
The water outlet is restricted.
There might be water in the wash chamber.
Clean the filter combination (see "Cleaning and
care").
Clean the drain pump (see "Frequently asked
questions").
Clean the non-return valve (see "Frequently asked
questions").
Remove any kinks or high loops in the drain hose.
Loading ...
Loading ...
Loading ...