Loading ...
Loading ...
Loading ...
Operation
42
End of program
At the end of a program, the In-
operation indicator light will be visible
flashing slowly with the door shut.
The program has finished when End
or AutoOpen appears in the display and
the door has opened slightly (if
applicable).
If Extra Drying was selected and
AutoOpen is active, the drying fan will
run for a few minutes after the
program has ended.
Open the door completely to re-
engage the door closing mechanism.
You can now empty the dishwasher.
The In-operation indicator light will go
out 10 minutes after the end of the
program if the door is closed.
If you have deactivated the
automatic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the program, then make
sure that you open the door fully.
Otherwise steam from the
dishwasher could damage the edge
of the counter because the fan is no
longer running.
Switching off
At the end of a program:
Open the door.
Turn the dishwasher off with the
button.
The dishwasher will continue to use
electricity until it is switched off with
the button.
Tip: If the dishwasher is not going to be
used for a longer period of time, e.g.,
while on vacation, the water supply
should be turned off.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are cool
enough to handle before unloading
them.
The dishes will cool much faster if you
open the door when the program has
ended.
Unload the lower basket first, then the
upper basket and then the cutlery tray
(depending on model).
This will prevent water from the upper
basket and cutlery tray from dripping
onto dishes in the lower basket.
Loading ...
Loading ...
Loading ...