Loading ...
Loading ...
Loading ...
Commissioning
19
Display functions
General information
The following functions can be selected
or set with the display:
– The program
– The delay start time
– The settings
The following appears in the display
while a program is running:
– The program stage
– The estimated time left for the
program to run
– Any relevant fault messages and
information
To save energy, the dishwasher will
switch to Standby-mode within a few
minutes if no program is running and
no button is pressed. After several
more minutes it switches off
completely (see "Operation,
Standby").
To turn the dishwasher back on, press
the button.
Settings menu
The Settings menu is used to alter the
dishwasher's electronics to suit
different requirements.
You access the Settings menu by
pressing a specific button combination.
For more information see "Settings
menu".
In the Settings menu, the normal
functions of the buttons to the right of
the display are not active, allowing you
to select and confirm menu options
with these buttons.
The left and right arrows in the display
indicate that additional options are
available. You can use the left or right
arrow buttons beside the display as
appropriate to select these further
options.
Use the center button beside the
display to confirm messages or settings
and to switch to the next menu or
submenu.
A check will appear beside the
option which is currently selected.
Loading ...
Loading ...
Loading ...