Loading ...
Loading ...
Loading ...
Operation
40
Switching on the appliance
Turn on the water supply if it is turned
off.
Make sure the spray arms are not
obstructed.
Close the door.
Switch the dishwasher on with the
button.
The factory-set Normal program will
appear in the display and the matching
indicator light will come on.
After a short while, the estimated
program duration for the selected
program will appear in the display.
You can also change the setting to the
program you last used (see "Settings
menu, Program selection").
Selecting a program
Choose your program according to the
type of load and how dirty it is.
The different programs and their uses
are described in the Program chart
later on in this booklet.
Select the program required with the
button.
The indicator light next to the program
selected will come on.
When the indicator light next to
lights up, you can select further
programs by means of the > button.
You can now select additional
functions (see "Additional functions").
Starting a program
Start the program by closing the
door.
The In-operation indicator comes on to
show that a program has been started.
If any additional functions are selected,
the appropriate indicators will also light
up.
A program should only be cancelled
in the first few minutes, if at all.
Important program stages (e.g.
reactivating the water softener) could
otherwise be omitted.
Loading ...
Loading ...
Loading ...