Loading ...
Loading ...
Loading ...
Settings menu
52
AutoOpen
To improve drying, the door
automatically opens a little at the end of
a program, except for Pre-rinse,
ProSpeed and Glass no rinse aid (see
Program guide).
With the Universal, Intensive and
Glasses program, AutoOpen can only
be activated by selecting Extra Drying
(see "Additional functions, Extra
drying").
With the Normal program the door
opens during the drying phase.
This function can be deactivated if
wished.
Select the desired setting and press
the center button to confirm.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the program, make sure
that you open the door fully.
Otherwise steam from the
dishwasher could damage the edge
of the counter because the fan is no
longer running.
Optimize Standby
To save energy, the dishwasher will
switch to Standby mode a few minutes
after the last time a button has been
pressed or a few minutes after the end
of the program. The display and
indicator lights will go out and only the
indicator light will flash slowly.
If the dishwasher is not turned off at the
end of the program, it will switch off
completely after a few minutes in
Standby mode.
Optimize Standby can be switched off if
you prefer. If you do this, the display
and indicator lights will not go out and
the duration before the dishwasher
switches off automatically increases to
approx. 6 hours.
Doing this will increase energy
consumption.
Select the desired setting and press
the center button to confirm.
The dishwasher will not switch to
Standby mode while a program is
running, if salt or rinse aid needs to
be replenished or there is a fault.
Loading ...
Loading ...
Loading ...